Total
1813 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8331 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-8197 | 1 Huawei | 1 Fusionsphere | 2024-11-21 | 9.0 HIGH | 7.2 HIGH |
| FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands. | |||||
| CVE-2017-8193 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 7.7 HIGH | 8.0 HIGH |
| The FusionSphere OpenStack V100R006C00SPC102(NFV) has a command injection vulnerability. Due to the insufficient input validation on one port, an authenticated, local attacker may exploit the vulnerability to gain root privileges by sending message with malicious commands. | |||||
| CVE-2017-8188 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 6.5 MEDIUM | 7.2 HIGH |
| FusionSphere OpenStack V100R006C00SPC102(NFV)has a command injection vulnerability. Due to lack of validation, an attacker with high privilege may inject malicious code into some module of the affected products, causing code execution. | |||||
| CVE-2017-8135 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands. | |||||
| CVE-2017-8134 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands. | |||||
| CVE-2017-8133 | 1 Huawei | 1 Neteco | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted. | |||||
| CVE-2017-8132 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands. | |||||
| CVE-2017-8131 | 1 Huawei | 1 Fusionsphere Openstack | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| The FusionSphere OpenStack with software V100R006C00 and V100R006C10 has a command injection vulnerability due to the insufficient input validation on four TCP listening ports. An unauthenticated attacker can exploit the vulnerabilities to gain root privileges by sending some messages with malicious commands. | |||||
| CVE-2017-7977 | 1 Unicon-software | 1 Elux | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| The Screensavercc component in eLux RP before 5.5.0 allows attackers to bypass intended configuration restrictions and execute arbitrary commands with root privileges by inserting commands in a local configuration dialog in the control panel. | |||||
| CVE-2017-7876 | 1 Qnap | 1 Qts | 2024-11-21 | 7.5 HIGH | 10.0 CRITICAL |
| This command injection vulnerability in QTS allows attackers to run arbitrary commands in the compromised application. QNAP have already fixed the issue in QTS 4.2.6 build 20170517, QTS 4.3.3.0174 build 20170503 and later versions. | |||||
| CVE-2017-7722 | 1 Solarwinds | 1 Log \& Event Manager | 2024-11-21 | 10.0 HIGH | 10.0 CRITICAL |
| In SolarWinds Log & Event Manager (LEM) before 6.3.1 Hotfix 4, a menu system is encountered when the SSH service is accessed with "cmc" and "password" (the default username and password). By exploiting a vulnerability in the restrictssh feature of the menuing script, an attacker can escape from the restricted shell. | |||||
| CVE-2017-7689 | 1 Schneider-electric | 2 Homelynk Controller Lss100100, Homelynk Controller Lss100100 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| A Command Injection vulnerability in Schneider Electric homeLYnk Controller exists in all versions before 1.5.0. | |||||
| CVE-2017-7161 | 2 Apple, Canonical | 2 Safari, Ubuntu Linux | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered in certain Apple products. Safari before 11.0.2 is affected. The issue involves the "WebKit Web Inspector" component. It allows remote attackers to execute arbitrary code via special characters that trigger command injection. | |||||
| CVE-2017-6794 | 1 Cisco | 1 Meeting Server | 2024-11-21 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. | |||||
| CVE-2017-6650 | 1 Cisco | 10 Nexus 5548up, Nexus 5596t, Nexus 5596up and 7 more | 2024-11-21 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771. | |||||
| CVE-2017-6649 | 1 Cisco | 10 Nexus 5548up, Nexus 5596t, Nexus 5596up and 7 more | 2024-11-21 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555. | |||||
| CVE-2017-6184 | 1 Sophos | 1 Web Appliance | 2024-11-21 | 6.5 MEDIUM | 4.7 MEDIUM |
| In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via the token parameter, aka NSWA-1303. | |||||
| CVE-2017-6183 | 1 Sophos | 1 Web Appliance | 2024-11-21 | 6.5 MEDIUM | 7.2 HIGH |
| In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's configuration utilities for adding (and detecting) Active Directory servers was vulnerable to remote command injection, aka NSWA-1314. | |||||
| CVE-2017-6048 | 1 Satel-iberia | 3 Sennet Multitask Meter, Sennet Optimal Datalogger, Sennet Solar Datalogger | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| A Command Injection issue was discovered in Satel Iberia SenNet Data Logger and Electricity Meters: SenNet Optimal DataLogger V5.37c-1.43c and prior, SenNet Solar Datalogger V5.03-1.56a and prior, and SenNet Multitask Meter V5.21a-1.18b and prior. Successful exploitation of this vulnerability could result in the attacker breaking out of the jailed shell and gaining full access to the system. | |||||