Filtered by vendor Securifi
Subscribe
Total
15 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8337 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of executing various actions on the web management interface. It seems that the device does not implement any Origin header check which allows an attacker who can trick a user to navigate to an attacker's webpage to exploit this issue and brute force the password for the web management interface. It also allows an attacker to then execute any other actions which include management if rules, sensors attached to the devices using the websocket requests. | |||||
| CVE-2017-8336 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in overflowing the stack set up and allow an attacker to control the $ra register stored on the stack. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request. The POST parameter "gateway" allows to overflow the stack and control the $ra register after 1546 characters. The value from this post parameter is then copied on the stack at address 0x00421348 as shown below. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-8335 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.0 MEDIUM | 8.0 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function. | |||||
| CVE-2017-8334 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.0 MEDIUM | 8.0 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking IP addresses using the web management interface. It seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface. | |||||
| CVE-2017-8333 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "popen" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "dest" is extracted at address 0x00420FC4. The POST parameter "dest is concatenated in a route add command and this is passed to a "popen" function at address 0x00421220. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-8332 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking key words passing in the web traffic to prevent kids from watching content that might be deemed unsafe using the web management interface. It seems that the device does not implement any cross-site scripting protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a stored cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface. | |||||
| CVE-2017-8331 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-8330 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 3.3 LOW | 6.5 MEDIUM |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a UPnP functionality for devices to interface with the router and interact with the device. It seems that the "NewInMessage" SOAP parameter passed with a huge payload results in crashing the process. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "miniupnpd" is the one that has the vulnerable function that receives the values sent by the SOAP request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function WscDevPutMessage at address 0x0041DBB8 in IDA pro is identified to be receiving the values sent in the SOAP request. The SOAP parameter "NewInMesage" received at address 0x0041DC30 causes the miniupnpd process to finally crash when a second request is sent to the same process. | |||||
| CVE-2017-8329 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 4.6 MEDIUM | 6.4 MEDIUM |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting a name for the wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function at address 0x00412CE4 (routerSummary) in the binary "webServer" located in Almond folder, which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function at address 0x00412EAC and this results in overflowing the buffer as the function copies the value directly on the stack. | |||||
| CVE-2017-8328 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | 9.3 HIGH | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change a user's password. Also this is a systemic issue. | |||||
| CVE-2015-7296 | 1 Securifi | 4 Almond, Almond-2015, Almond-2015 Firmware and 1 more | 2024-11-21 | 4.3 MEDIUM | N/A |
| Securifi Almond devices with firmware before AL1-R201EXP10-L304-W34 and Almond-2015 devices with firmware before AL2-R088M use a linear algorithm for selecting the ID value in the header of a DNS query performed on behalf of the device itself, which makes it easier for remote attackers to spoof responses by including this ID value, as demonstrated by a response containing the address of the firmware update server, a different vulnerability than CVE-2015-2914. | |||||
| CVE-2015-2917 | 1 Securifi | 4 Almond, Almond-2015, Almond-2015 Firmware and 1 more | 2024-11-21 | 4.3 MEDIUM | N/A |
| Securifi Almond devices with firmware before AL1-R201EXP10-L304-W34 and Almond-2015 devices with firmware before AL2-R088M unintentionally omit the X-Frame-Options HTTP header, which makes it easier for remote attackers to conduct clickjacking attacks via a crafted web site that contains a (1) FRAME, (2) IFRAME, or (3) OBJECT element. | |||||
| CVE-2015-2916 | 1 Securifi | 4 Almond, Almond-2015, Almond-2015 Firmware and 1 more | 2024-11-21 | 6.8 MEDIUM | N/A |
| Cross-site request forgery (CSRF) vulnerability on Securifi Almond devices with firmware before AL1-R201EXP10-L304-W34 and Almond-2015 devices with firmware before AL2-R088M allows remote attackers to hijack the authentication of arbitrary users. | |||||
| CVE-2015-2915 | 1 Securifi | 4 Almond, Almond-2015, Almond-2015 Firmware and 1 more | 2024-11-21 | 7.3 HIGH | N/A |
| Securifi Almond devices with firmware before AL1-R201EXP10-L304-W34 and Almond-2015 devices with firmware before AL2-R088M have a default password of admin for the admin account, which allows remote attackers to obtain web-management access by leveraging the ability to authenticate from the intranet. | |||||
| CVE-2015-2914 | 1 Securifi | 4 Almond, Almond-2015, Almond-2015 Firmware and 1 more | 2024-11-21 | 5.0 MEDIUM | N/A |
| Securifi Almond devices with firmware before AL1-R201EXP10-L304-W34 and Almond-2015 devices with firmware before AL2-R088M use a fixed source-port number in outbound DNS queries performed on behalf of any device, which makes it easier for remote attackers to spoof responses by using this number for the destination port, a different vulnerability than CVE-2015-7296. | |||||