Filtered by vendor Netapp
Subscribe
Total
2315 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-38476 | 2 Apache, Netapp | 2 Http Server, Clustered Data Ontap | 2024-10-29 | N/A | 9.8 CRITICAL |
| Vulnerability in core of Apache HTTP Server 2.4.59 and earlier are vulnerably to information disclosure, SSRF or local script execution via backend applications whose response headers are malicious or exploitable. Users are recommended to upgrade to version 2.4.60, which fixes this issue. | |||||
| CVE-2018-20839 | 2 Netapp, Systemd Project | 5 Cn1610, Cn1610 Firmware, Snapprotect and 2 more | 2024-10-24 | 4.3 MEDIUM | 4.3 MEDIUM |
| systemd 242 changes the VT1 mode upon a logout, which allows attackers to read cleartext passwords in certain circumstances, such as watching a shutdown, or using Ctrl-Alt-F1 and Ctrl-Alt-F2. This occurs because the KDGKBMODE (aka current keyboard mode) check is mishandled. | |||||
| CVE-2023-6516 | 2 Isc, Netapp | 2 Bind, Active Iq Unified Manager | 2024-10-22 | N/A | 7.5 HIGH |
| To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1. | |||||
| CVE-2023-5517 | 3 Fedoraproject, Isc, Netapp | 3 Fedora, Bind, Active Iq Unified Manager | 2024-10-22 | N/A | 7.5 HIGH |
| A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect <domain>;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1. | |||||
| CVE-2023-5679 | 3 Fedoraproject, Isc, Netapp | 3 Fedora, Bind, Active Iq Unified Manager | 2024-10-22 | N/A | 7.5 HIGH |
| A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1. | |||||
| CVE-2023-5680 | 2 Isc, Netapp | 2 Bind, Active Iq Unified Manager | 2024-10-22 | N/A | 5.3 MEDIUM |
| If a resolver cache has a very large number of ECS records stored for the same name, the process of cleaning the cache database node for this name can significantly impair query performance. This issue affects BIND 9 versions 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1. | |||||
| CVE-2023-4408 | 3 Fedoraproject, Isc, Netapp | 3 Fedora, Bind, Ontap | 2024-10-21 | N/A | 7.5 HIGH |
| The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1. | |||||
| CVE-2023-35828 | 2 Linux, Netapp | 6 Linux Kernel, H300s, H410c and 3 more | 2024-10-21 | N/A | 7.0 HIGH |
| An issue was discovered in the Linux kernel before 6.3.2. A use-after-free was found in renesas_usb3_remove in drivers/usb/gadget/udc/renesas_usb3.c. | |||||
| CVE-2019-7317 | 11 Canonical, Debian, Hp and 8 more | 33 Ubuntu Linux, Debian Linux, Xp7 Command View and 30 more | 2024-10-21 | 2.6 LOW | 5.3 MEDIUM |
| png_image_free in png.c in libpng 1.6.x before 1.6.37 has a use-after-free because png_image_free_function is called under png_safe_execute. | |||||
| CVE-2023-38545 | 4 Fedoraproject, Haxx, Microsoft and 1 more | 13 Fedora, Libcurl, Windows 10 1809 and 10 more | 2024-10-17 | N/A | 9.8 CRITICAL |
| This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake. When curl is asked to pass along the host name to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that host name can be is 255 bytes. If the host name is detected to be longer, curl switches to local name resolving and instead passes on the resolved address only. Due to this bug, the local variable that means "let the host resolve the name" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long host name to the target buffer instead of copying just the resolved address there. The target buffer being a heap based buffer, and the host name coming from the URL that curl has been told to operate with. | |||||
| CVE-2023-38428 | 2 Linux, Netapp | 7 Linux Kernel, H300s, H410s and 4 more | 2024-10-15 | N/A | 9.1 CRITICAL |
| An issue was discovered in the Linux kernel before 6.3.4. fs/ksmbd/smb2pdu.c in ksmbd does not properly check the UserName value because it does not consider the address of security buffer, leading to an out-of-bounds read. | |||||
| CVE-2019-13990 | 5 Apache, Atlassian, Netapp and 2 more | 31 Tomee, Jira Service Management, Active Iq Unified Manager and 28 more | 2024-10-15 | 7.5 HIGH | 9.8 CRITICAL |
| initDocumentParser in xml/XMLSchedulingDataProcessor.java in Terracotta Quartz Scheduler through 2.3.0 allows XXE attacks via a job description. | |||||
| CVE-2023-5363 | 3 Debian, Netapp, Openssl | 12 Debian Linux, H300s, H300s Firmware and 9 more | 2024-10-14 | N/A | 7.5 HIGH |
| Issue summary: A bug has been identified in the processing of key and initialisation vector (IV) lengths. This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers. Impact summary: A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes. When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established. Any alterations to the key length, via the "keylen" parameter or the IV length, via the "ivlen" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values. The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB. For the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality. For example, when following NIST's SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse. Both truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception. However, these issues are not currently assessed as security critical. Changing the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary. OpenSSL 3.1 and 3.0 are vulnerable to this issue. | |||||
| CVE-2023-2975 | 2 Netapp, Openssl | 3 Management Services For Element Software And Netapp Hci, Ontap Select Deploy Administration Utility, Openssl | 2024-10-14 | N/A | 5.3 MEDIUM |
| Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be misled by removing, adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue. | |||||
| CVE-2016-3427 | 8 Apache, Canonical, Debian and 5 more | 38 Cassandra, Ubuntu Linux, Debian Linux and 35 more | 2024-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| Unspecified vulnerability in Oracle Java SE 6u113, 7u99, and 8u77; Java SE Embedded 8u77; and JRockit R28.3.9 allows remote attackers to affect confidentiality, integrity, and availability via vectors related to JMX. | |||||
| CVE-2024-21145 | 2 Netapp, Oracle | 8 Bluexp, Cloud Insights Storage Workload Security Agent, Oncommand Insight and 5 more | 2024-09-20 | N/A | 4.8 MEDIUM |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u411, 8u411-perf, 11.0.23, 17.0.11, 21.0.3, 22.0.1; Oracle GraalVM for JDK: 17.0.11, 21.0.3, 22.0.1; Oracle GraalVM Enterprise Edition: 20.3.14 and 21.3.10. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). | |||||
| CVE-2021-3156 | 8 Beyondtrust, Debian, Fedoraproject and 5 more | 31 Privilege Management For Mac, Privilege Management For Unix\/linux, Debian Linux and 28 more | 2024-09-19 | 7.2 HIGH | 7.8 HIGH |
| Sudo before 1.9.5p2 contains an off-by-one error that can result in a heap-based buffer overflow, which allows privilege escalation to root via "sudoedit -s" and a command-line argument that ends with a single backslash character. | |||||
| CVE-2024-21144 | 2 Netapp, Oracle | 4 Oncommand Workflow Automation, Graalvm, Java Jdk and 1 more | 2024-09-18 | N/A | 3.7 LOW |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Concurrency). Supported versions that are affected are Oracle Java SE: 8u411, 8u411-perf, 11.0.23; Oracle GraalVM Enterprise Edition: 20.3.14 and 21.3.10. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | |||||
| CVE-2023-40745 | 4 Fedoraproject, Libtiff, Netapp and 1 more | 4 Fedora, Libtiff, Active Iq Unified Manager and 1 more | 2024-09-16 | N/A | 6.5 MEDIUM |
| LibTIFF is vulnerable to an integer overflow. This flaw allows remote attackers to cause a denial of service (application crash) or possibly execute an arbitrary code via a crafted tiff image, which triggers a heap-based buffer overflow. | |||||
| CVE-2023-4813 | 4 Fedoraproject, Gnu, Netapp and 1 more | 21 Fedora, Glibc, Active Iq Unified Manager and 18 more | 2024-09-16 | N/A | 5.9 MEDIUM |
| A flaw was found in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge. | |||||