Filtered by vendor Agendaless
Subscribe
Total
10 CVE
CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
---|---|---|---|---|---|
CVE-2024-49769 | 1 Agendaless | 1 Waitress | 2024-11-07 | N/A | 7.5 HIGH |
Waitress is a Web Server Gateway Interface server for Python 2 and 3. When a remote client closes the connection before waitress has had the opportunity to call getpeername() waitress won't correctly clean up the connection leading to the main thread attempting to write to a socket that no longer exists, but not removing it from the list of sockets to attempt to process. This leads to a busy-loop calling the write function. A remote attacker could run waitress out of available sockets with very little resources required. Waitress 3.0.1 contains fixes that remove the race condition. | |||||
CVE-2024-49768 | 1 Agendaless | 1 Waitress | 2024-11-07 | N/A | 4.8 MEDIUM |
Waitress is a Web Server Gateway Interface server for Python 2 and 3. A remote client may send a request that is exactly recv_bytes (defaults to 8192) long, followed by a secondary request using HTTP pipelining. When request lookahead is disabled (default) we won't read any more requests, and when the first request fails due to a parsing error, we simply close the connection. However when request lookahead is enabled, it is possible to process and receive the first request, start sending the error message back to the client while we read the next request and queue it. This will allow the secondary request to be serviced by the worker thread while the connection should be closed. Waitress 3.0.1 fixes the race condition. As a workaround, disable channel_request_lookahead, this is set to 0 by default disabling this feature. | |||||
CVE-2023-40587 | 2 Agendaless, Fedoraproject | 2 Pyramid, Fedora | 2024-02-28 | N/A | 5.3 MEDIUM |
Pyramid is an open source Python web framework. A path traversal vulnerability in Pyramid versions 2.0.0 and 2.0.1 impacts users of Python 3.11 that are using a Pyramid static view with a full filesystem path and have a `index.html` file that is located exactly one directory above the location of the static view's file system path. No further path traversal exists, and the only file that could be disclosed accidentally is `index.html`. Pyramid version 2.0.2 rejects any path that contains a null-byte out of caution. While valid in directory/file names, we would strongly consider it a mistake to use null-bytes in naming files/directories. Secondly, Python 3.11, and 3.12 has fixed the underlying issue in `os.path.normpath` to no longer truncate on the first `0x00` found, returning the behavior to pre-3.11 Python, un an as of yet unreleased version. Fixes will be available in:Python 3.12.0rc2 and 3.11.5. Some workarounds are available. Use a version of Python 3 that is not affected, downgrade to Python 3.10 series temporarily, or wait until Python 3.11.5 is released and upgrade to the latest version of Python 3.11 series. | |||||
CVE-2022-24761 | 2 Agendaless, Debian | 2 Waitress, Debian Linux | 2024-02-28 | 5.0 MEDIUM | 7.5 HIGH |
Waitress is a Web Server Gateway Interface server for Python 2 and 3. When using Waitress versions 2.1.0 and prior behind a proxy that does not properly validate the incoming HTTP request matches the RFC7230 standard, Waitress and the frontend proxy may disagree on where one request starts and where it ends. This would allow requests to be smuggled via the front-end proxy to waitress and later behavior. There are two classes of vulnerability that may lead to request smuggling that are addressed by this advisory: The use of Python's `int()` to parse strings into integers, leading to `+10` to be parsed as `10`, or `0x01` to be parsed as `1`, where as the standard specifies that the string should contain only digits or hex digits; and Waitress does not support chunk extensions, however it was discarding them without validating that they did not contain illegal characters. This vulnerability has been patched in Waitress 2.1.1. A workaround is available. When deploying a proxy in front of waitress, turning on any and all functionality to make sure that the request matches the RFC7230 standard. Certain proxy servers may not have this functionality though and users are encouraged to upgrade to the latest version of waitress instead. | |||||
CVE-2022-31015 | 1 Agendaless | 1 Waitress | 2024-02-28 | 4.3 MEDIUM | 5.9 MEDIUM |
Waitress is a Web Server Gateway Interface server for Python 2 and 3. Waitress versions 2.1.0 and 2.1.1 may terminate early due to a thread closing a socket while the main thread is about to call select(). This will lead to the main thread raising an exception that is not handled and then causing the entire application to be killed. This issue has been fixed in Waitress 2.1.2 by no longer allowing the WSGI thread to close the socket. Instead, that is always delegated to the main thread. There is no work-around for this issue. However, users using waitress behind a reverse proxy server are less likely to have issues if the reverse proxy always reads the full response. | |||||
CVE-2020-5236 | 1 Agendaless | 1 Waitress | 2024-02-28 | 6.8 MEDIUM | 6.5 MEDIUM |
Waitress version 1.4.2 allows a DOS attack When waitress receives a header that contains invalid characters. When a header like "Bad-header: xxxxxxxxxxxxxxx\x10" is received, it will cause the regular expression engine to catastrophically backtrack causing the process to use 100% CPU time and blocking any other interactions. This allows an attacker to send a single request with an invalid header and take the service offline. This issue was introduced in version 1.4.2 when the regular expression was updated to attempt to match the behaviour required by errata associated with RFC7230. The regular expression that is used to validate incoming headers has been updated in version 1.4.3, it is recommended that people upgrade to the new version of Waitress as soon as possible. | |||||
CVE-2019-16786 | 5 Agendaless, Debian, Fedoraproject and 2 more | 5 Waitress, Debian Linux, Fedora and 2 more | 2024-02-28 | 5.0 MEDIUM | 7.5 HIGH |
Waitress through version 1.3.1 would parse the Transfer-Encoding header and only look for a single string value, if that value was not chunked it would fall through and use the Content-Length header instead. According to the HTTP standard Transfer-Encoding should be a comma separated list, with the inner-most encoding first, followed by any further transfer codings, ending with chunked. Requests sent with: "Transfer-Encoding: gzip, chunked" would incorrectly get ignored, and the request would use a Content-Length header instead to determine the body size of the HTTP message. This could allow for Waitress to treat a single request as multiple requests in the case of HTTP pipelining. This issue is fixed in Waitress 1.4.0. | |||||
CVE-2019-16792 | 3 Agendaless, Debian, Oracle | 3 Waitress, Debian Linux, Communications Cloud Native Core Network Function Cloud Native Environment | 2024-02-28 | 5.0 MEDIUM | 7.5 HIGH |
Waitress through version 1.3.1 allows request smuggling by sending the Content-Length header twice. Waitress would header fold a double Content-Length header and due to being unable to cast the now comma separated value to an integer would set the Content-Length to 0 internally. If two Content-Length headers are sent in a single request, Waitress would treat the request as having no body, thereby treating the body of the request as a new request in HTTP pipelining. This issue is fixed in Waitress 1.4.0. | |||||
CVE-2019-16789 | 5 Agendaless, Debian, Fedoraproject and 2 more | 5 Waitress, Debian Linux, Fedora and 2 more | 2024-02-28 | 6.4 MEDIUM | 8.2 HIGH |
In Waitress through version 1.4.0, if a proxy server is used in front of waitress, an invalid request may be sent by an attacker that bypasses the front-end and is parsed differently by waitress leading to a potential for HTTP request smuggling. Specially crafted requests containing special whitespace characters in the Transfer-Encoding header would get parsed by Waitress as being a chunked request, but a front-end server would use the Content-Length instead as the Transfer-Encoding header is considered invalid due to containing invalid characters. If a front-end server does HTTP pipelining to a backend Waitress server this could lead to HTTP request splitting which may lead to potential cache poisoning or unexpected information disclosure. This issue is fixed in Waitress 1.4.1 through more strict HTTP field validation. | |||||
CVE-2019-16785 | 5 Agendaless, Debian, Fedoraproject and 2 more | 5 Waitress, Debian Linux, Fedora and 2 more | 2024-02-28 | 5.0 MEDIUM | 7.5 HIGH |
Waitress through version 1.3.1 implemented a "MAY" part of the RFC7230 which states: "Although the line terminator for the start-line and header fields is the sequence CRLF, a recipient MAY recognize a single LF as a line terminator and ignore any preceding CR." Unfortunately if a front-end server does not parse header fields with an LF the same way as it does those with a CRLF it can lead to the front-end and the back-end server parsing the same HTTP message in two different ways. This can lead to a potential for HTTP request smuggling/splitting whereby Waitress may see two requests while the front-end server only sees a single HTTP message. This issue is fixed in Waitress 1.4.0. |