Total
1553 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50066 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix move_normal_pmd/retract_page_tables race In mremap(), move_page_tables() looks at the type of the PMD entry and the specified address range to figure out by which method the next chunk of page table entries should be moved. At that point, the mmap_lock is held in write mode, but no rmap locks are held yet. For PMD entries that point to page tables and are fully covered by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called, which first takes rmap locks, then does move_normal_pmd(). move_normal_pmd() takes the necessary page table locks at source and destination, then moves an entire page table from the source to the destination. The problem is: The rmap locks, which protect against concurrent page table removal by retract_page_tables() in the THP code, are only taken after the PMD entry has been read and it has been decided how to move it. So we can race as follows (with two processes that have mappings of the same tmpfs file that is stored on a tmpfs mount with huge=advise); note that process A accesses page tables through the MM while process B does it through the file rmap: process A process B ========= ========= mremap mremap_to move_vma move_page_tables get_old_pmd alloc_new_pmd *** PREEMPT *** madvise(MADV_COLLAPSE) do_madvise madvise_walk_vmas madvise_vma_behavior madvise_collapse hpage_collapse_scan_file collapse_file retract_page_tables i_mmap_lock_read(mapping) pmdp_collapse_flush i_mmap_unlock_read(mapping) move_pgt_entry(NORMAL_PMD, ...) take_rmap_locks move_normal_pmd drop_rmap_locks When this happens, move_normal_pmd() can end up creating bogus PMD entries in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect depends on arch-specific and machine-specific details; on x86, you can end up with physical page 0 mapped as a page table, which is likely exploitable for user->kernel privilege escalation. Fix the race by letting process B recheck that the PMD still points to a page table after the rmap locks have been taken. Otherwise, we bail and let the caller fall back to the PTE-level copying path, which will then bail immediately at the pmd_none() check. Bug reachability: Reaching this bug requires that you can create shmem/file THP mappings - anonymous THP uses different code that doesn't zap stuff under rmap locks. File THP is gated on an experimental config flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need shmem THP to hit this bug. As far as I know, getting shmem THP normally requires that you can mount your own tmpfs with the right mount flags, which would require creating your own user+mount namespace; though I don't know if some distros maybe enable shmem THP by default or something like that. Bug impact: This issue can likely be used for user->kernel privilege escalation when it is reachable. | |||||
| CVE-2024-48069 | 2024-11-21 | N/A | 9.8 CRITICAL | ||
| A vulnerability was found in Weaver E-cology allows attackers use race conditions to bypass security mechanisms to upload malicious files and control server privileges | |||||
| CVE-2024-47534 | 2024-11-21 | N/A | N/A | ||
| go-tuf is a Go implementation of The Update Framework (TUF). The go-tuf client inconsistently traces the delegations. For example, if targets delegate to "A", and to "B", and "B" delegates to "C", then the client should trace the delegations in the order "A" then "B" then "C" but it may incorrectly trace the delegations "B"->"C"->"A". This vulnerability is fixed in 2.0.1. | |||||
| CVE-2024-7885 | 1 Redhat | 9 Build Of Apache Camel - Hawtio, Build Of Apache Camel For Spring Boot, Build Of Keycloak and 6 more | 2024-11-21 | N/A | 7.5 HIGH |
| A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments. | |||||
| CVE-2024-7589 | 1 Freebsd | 1 Freebsd | 2024-11-21 | N/A | 8.1 HIGH |
| A signal handler in sshd(8) may call a logging function that is not async-signal-safe. The signal handler is invoked when a client does not authenticate within the LoginGraceTime seconds (120 by default). This signal handler executes in the context of the sshd(8)'s privileged code, which is not sandboxed and runs with full root privileges. This issue is another instance of the problem in CVE-2024-6387 addressed by FreeBSD-SA-24:04.openssh. The faulty code in this case is from the integration of blacklistd in OpenSSH in FreeBSD. As a result of calling functions that are not async-signal-safe in the privileged sshd(8) context, a race condition exists that a determined attacker may be able to exploit to allow an unauthenticated remote code execution as root. | |||||
| CVE-2024-6778 | 2024-11-21 | N/A | 8.8 HIGH | ||
| Race in DevTools in Google Chrome prior to 126.0.6478.182 allowed an attacker who convinced a user to install a malicious extension to inject scripts or HTML into a privileged page via a crafted Chrome Extension. (Chromium security severity: High) | |||||
| CVE-2024-6387 | 9 Amazon, Canonical, Debian and 6 more | 20 Linux 2023, Ubuntu Linux, Debian Linux and 17 more | 2024-11-21 | N/A | 8.1 HIGH |
| A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. | |||||
| CVE-2024-40815 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2024-11-21 | N/A | 7.5 HIGH |
| A race condition was addressed with additional validation. This issue is fixed in macOS Ventura 13.6.8, iOS 17.6 and iPadOS 17.6, watchOS 10.6, tvOS 17.6, macOS Sonoma 14.6. A malicious attacker with arbitrary read and write capability may be able to bypass Pointer Authentication. | |||||
| CVE-2024-3979 | 2024-11-21 | 3.2 LOW | 4.4 MEDIUM | ||
| A vulnerability, which was classified as problematic, has been found in COVESA vsomeip up to 3.4.10. Affected by this issue is some unknown functionality. The manipulation leads to race condition. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261596. | |||||
| CVE-2024-39554 | 2024-11-21 | N/A | 5.9 MEDIUM | ||
| A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to inject incremental routing updates when BGP multipath is enabled, causing rpd to crash and restart, resulting in a Denial of Service (DoS). Since this is a timing issue (race condition), the successful exploitation of this vulnerability is outside the attacker's control. However, continued receipt and processing of this packet may create a sustained Denial of Service (DoS) condition. On all Junos OS and Junos OS Evolved platforms with BGP multipath enabled, a specific multipath calculation removes the original next hop from the multipath lead routes nexthop-set. When this change happens, multipath relies on certain internal timing to record the update. Under certain circumstance and with specific timing, this could result in an rpd crash. This issue only affects systems with BGP multipath enabled. This issue affects: Junos OS: * All versions of 21.1 * from 21.2 before 21.2R3-S7, * from 21.4 before 21.4R3-S6, * from 22.1 before 22.1R3-S5, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S2, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * All versions of 21.1-EVO, * All versions of 21.2-EVO, * from 21.4-EVO before 21.4R3-S6-EVO, * from 22.1-EVO before 22.1R3-S5-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-S2-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO. Versions of Junos OS before 21.1R1 are unaffected by this vulnerability. Versions of Junos OS Evolved before 21.1R1-EVO are unaffected by this vulnerability. | |||||
| CVE-2024-38628 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks. | |||||
| CVE-2024-36894 | 2024-11-21 | N/A | 5.6 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") | |||||
| CVE-2024-35899 | 2024-11-21 | N/A | 6.1 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat ---truncated--- | |||||
| CVE-2024-35255 | 1 Microsoft | 2 Authentication Library, Azure Identity Sdk | 2024-11-21 | N/A | 5.5 MEDIUM |
| Azure Identity Libraries and Microsoft Authentication Library Elevation of Privilege Vulnerability | |||||
| CVE-2024-34724 | 2024-11-21 | N/A | 7.0 HIGH | ||
| In _UnrefAndMaybeDestroy of pmr.c, there is a possible arbitrary code execution due to a race condition. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2024-33904 | 2024-11-21 | N/A | 7.0 HIGH | ||
| In plugins/HookSystem.cpp in Hyprland through 0.39.1 (before 28c8561), through a race condition, a local attacker can cause execution of arbitrary assembly code by writing to a predictable temporary file. | |||||
| CVE-2024-32997 | 2024-11-21 | N/A | 8.4 HIGH | ||
| Race condition vulnerability in the binder driver module Impact: Successful exploitation of this vulnerability will affect availability. | |||||
| CVE-2024-32993 | 2024-11-21 | N/A | 5.6 MEDIUM | ||
| Out-of-bounds access vulnerability in the memory module Impact: Successful exploitation of this vulnerability will affect availability. | |||||
| CVE-2024-32985 | 2024-11-21 | N/A | 5.9 MEDIUM | ||
| Stellar-core is a reference implementation for the peer-to-peer agent that manages the Stellar network. Prior to 20.4.0, core nodes could be randomly crashed due to a race condition with a 3rd party library. The likelihood of affecting the network is low since crashed nodes come back up online right away. Code fix mitigation is part of Stellar-core v20.4.0 release | |||||
| CVE-2024-32908 | 1 Google | 1 Android | 2024-11-21 | N/A | 7.8 HIGH |
| In sec_media_protect of media.c, there is a possible permission bypass due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||