Total
52 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-20399 | 1 Cisco | 201 Mds 9000, Mds 9100, Mds 9132t and 198 more | 2024-11-21 | N/A | 6.0 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated user in possession of Administrator credentials to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific configuration CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected configuration CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root. Note: To successfully exploit this vulnerability on a Cisco NX-OS device, an attacker must have Administrator credentials. The following Cisco devices already allow administrative users to access the underlying operating system through the bash-shell feature, so, for these devices, this vulnerability does not grant any additional privileges: Nexus 3000 Series Switches Nexus 7000 Series Switches that are running Cisco NX-OS Software releases 8.1(1) and later Nexus 9000 Series Switches in standalone NX-OS mode | |||||
| CVE-2023-44487 | 32 Akka, Amazon, Apache and 29 more | 311 Http Server, Opensearch Data Prepper, Apisix and 308 more | 2024-11-21 | N/A | 7.5 HIGH |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. | |||||
| CVE-2023-20050 | 1 Cisco | 111 Mds 9000, Mds 9100, Mds 9132t and 108 more | 2024-11-21 | N/A | 4.4 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user. | |||||
| CVE-2022-20824 | 1 Cisco | 288 Mds 9506, Mds 9506 Firmware, Mds 9513 and 285 more | 2024-11-21 | N/A | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2022-20823 | 1 Cisco | 294 Nexus 3016, Nexus 3016 Firmware, Nexus 3016q and 291 more | 2024-11-21 | N/A | 8.6 HIGH |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. | |||||
| CVE-2021-34714 | 1 Cisco | 225 Firepower 4100, Firepower 4110, Firepower 4112 and 222 more | 2024-11-21 | 5.7 MEDIUM | 7.4 HIGH |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process. | |||||
| CVE-2021-1387 | 1 Cisco | 121 Nexus 3016, Nexus 3016q, Nexus 3048 and 118 more | 2024-11-21 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because the software improperly releases resources when it processes certain IPv6 packets that are destined to an affected device. An attacker could exploit this vulnerability by sending multiple crafted IPv6 packets to an affected device. A successful exploit could cause the network stack to run out of available buffers, impairing operations of control plane and management plane protocols and resulting in a DoS condition. Manual intervention would be required to restore normal operations on the affected device. For more information about the impact of this vulnerability, see the Details section of this advisory. | |||||
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2024-11-21 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | |||||
| CVE-2020-3504 | 1 Cisco | 108 Firepower 1010, Firepower 1120, Firepower 1140 and 105 more | 2024-11-21 | 2.1 LOW | 3.3 LOW |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. | |||||
| CVE-2020-3454 | 1 Cisco | 83 Mds 9000, Mds 9100, Mds 9134 and 80 more | 2024-11-21 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. | |||||
| CVE-2020-3415 | 1 Cisco | 66 Nexus 3016, Nexus 3048, Nexus 3064 and 63 more | 2024-11-21 | 7.9 HIGH | 8.8 HIGH |
| A vulnerability in the Data Management Engine (DME) of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Exploitation of this vulnerability also requires jumbo frames to be enabled on the interface that receives the crafted Cisco Discovery Protocol packets on the affected device. | |||||
| CVE-2020-3398 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2024-11-21 | 4.3 MEDIUM | 8.6 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | |||||
| CVE-2020-3397 | 1 Cisco | 64 Nexus 3016, Nexus 3048, Nexus 3064 and 61 more | 2024-11-21 | 7.1 HIGH | 8.6 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | |||||
| CVE-2020-3394 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2024-11-21 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. | |||||
| CVE-2020-3338 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device. | |||||
| CVE-2020-3217 | 1 Cisco | 20 Ios, Ios Xe, Ios Xr and 17 more | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Topology Discovery Service of Cisco One Platform Kit (onePK) in Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient length restrictions when the onePK Topology Discovery Service parses Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol message to an affected device. An exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges, or to cause a process crash, which could result in a reload of the device and cause a DoS condition. | |||||
| CVE-2020-3174 | 1 Cisco | 80 Mds 9132t, Mds 9148s, Mds 9148t and 77 more | 2024-11-21 | 3.3 LOW | 4.7 MEDIUM |
| A vulnerability in the anycast gateway feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a device to learn invalid Address Resolution Protocol (ARP) entries. The ARP entries are for nonlocal IP addresses for the subnet. The vulnerability is due to improper validation of a received gratuitous ARP (GARP) request. An attacker could exploit this vulnerability by sending a malicious GARP packet on the local subnet to cause the ARP table on the device to become corrupted. A successful exploit could allow the attacker to populate the ARP table with incorrect entries, which could lead to traffic disruptions. | |||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | |||||
| CVE-2020-3165 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2024-11-21 | 4.3 MEDIUM | 8.2 HIGH |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network. | |||||
| CVE-2020-3120 | 1 Cisco | 144 Asr 9000v, Asr 9001, Asr 9006 and 141 more | 2024-11-21 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||