Total
12 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-12231 | 1 Cisco | 329 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router and 326 more | 2024-07-16 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217. | |||||
| CVE-2017-12240 | 1 Cisco | 265 1000 Integrated Services Router, 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router and 262 more | 2024-07-16 | 10.0 HIGH | 9.8 CRITICAL |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. | |||||
| CVE-2023-20065 | 1 Cisco | 271 1000 Integrated Services Router, 1100-4g Integrated Services Router, 1100-4p Integrated Services Router and 268 more | 2024-02-28 | N/A | 7.8 HIGH |
| A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. | |||||
| CVE-2023-20081 | 1 Cisco | 304 1100-4g Integrated Services Router, 1100-4p Integrated Services Router, 1100-6g Integrated Services Router and 301 more | 2024-02-28 | N/A | 5.9 MEDIUM |
| A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position. | |||||
| CVE-2023-20066 | 1 Cisco | 271 1000 Integrated Services Router, 1100-4g Integrated Services Router, 1100-4p Integrated Services Router and 268 more | 2024-02-28 | N/A | 6.5 MEDIUM |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform a directory traversal and access resources that are outside the filesystem mountpoint of the web UI. This vulnerability is due to an insufficient security configuration. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to files that are outside the filesystem mountpoint of the web UI. Note: These files are located on a restricted filesystem that is maintained for the web UI. There is no ability to write to any files on this filesystem. | |||||
| CVE-2022-20848 | 1 Cisco | 360 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 357 more | 2024-02-28 | N/A | 7.5 HIGH |
| A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. | |||||
| CVE-2022-20919 | 1 Cisco | 305 1000 Integrated Services Router, 1100-4g Integrated Services Router, 1100-4p Integrated Services Router and 302 more | 2024-02-28 | N/A | 7.5 HIGH |
| A vulnerability in the processing of malformed Common Industrial Protocol (CIP) packets that are sent to Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation during processing of CIP packets. An attacker could exploit this vulnerability by sending a malformed CIP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition. | |||||
| CVE-2021-34696 | 1 Cisco | 23 Asr 902, Asr 903, Asr 907 and 20 more | 2024-02-28 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. | |||||
| CVE-2020-3513 | 1 Cisco | 7 Asr 902, Asr 903, Asr 907 and 4 more | 2024-02-28 | 6.9 MEDIUM | 6.7 MEDIUM |
| Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device. | |||||
| CVE-2020-3416 | 1 Cisco | 4 Asr 902, Asr 903, Asr 907 and 1 more | 2024-02-28 | 6.9 MEDIUM | 6.7 MEDIUM |
| Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device. | |||||
| CVE-2019-12653 | 1 Cisco | 6 Asr 902, Asr 902u, Asr 903 and 3 more | 2024-02-28 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol. | |||||
| CVE-2017-6603 | 1 Cisco | 10 Asr-920-12cz-a, Asr-920-12cz-d, Asr-920-12sz-im and 7 more | 2024-02-28 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in Cisco ASR 903 or ASR 920 Series Devices running with an RSP2 card could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on a targeted system because of incorrect IPv6 Packet Processing. More Information: CSCuy94366. Known Affected Releases: 15.4(3)S3.15. Known Fixed Releases: 15.6(2)SP 15.6(1.31)SP. | |||||