Filtered by vendor Dlink
Subscribe
Total
950 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8408 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the GET parameters passed in this request (to test if SMB credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "cgibox" is the one that has the vulnerable function "sub_7EAFC" that receives the values sent by the GET request. If we open this binary in IDA-pro we will notice that this follows a ARM little endian format. The function sub_7EAFC in IDA pro is identified to be receiving the values sent in the GET request and the value set in GET parameter "user" is extracted in function sub_7E49C which is then passed to the vulnerable system API call. | |||||
| CVE-2017-8407 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password. | |||||
| CVE-2017-8406 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield. | |||||
| CVE-2017-8405 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there. | |||||
| CVE-2017-8404 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue. | |||||
| CVE-2017-7852 | 1 Dlink | 52 Dcs-2132l, Dcs-2132l Firmware, Dcs-2136l and 49 more | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1. | |||||
| CVE-2017-7851 | 2 D-link, Dlink | 2 Dcs-936l, Dcs-936l | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header. | |||||
| CVE-2017-7406 | 1 Dlink | 1 Dir-615 | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic. | |||||
| CVE-2017-7405 | 1 Dlink | 1 Dir-615 | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials. | |||||
| CVE-2017-7404 | 1 Dlink | 1 Dir-615 | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware. | |||||
| CVE-2017-7398 | 2 D-link, Dlink | 2 Dir-615 Firmware, Dir-615 | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password. | |||||
| CVE-2017-6411 | 1 Dlink | 2 Dsl-2730u, Dsl-2730u Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password. | |||||
| CVE-2017-6206 | 1 Dlink | 7 Websmart Dgs-1510-20, Websmart Dgs-1510-28, Websmart Dgs-1510-28p and 4 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Information Disclosure attacks via unspecified vectors. | |||||
| CVE-2017-6205 | 1 Dlink | 7 Websmart Dgs-1510-20, Websmart Dgs-1510-28, Websmart Dgs-1510-28p and 4 more | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Command Bypass attacks via unspecified vectors. | |||||
| CVE-2017-6190 | 1 Dlink | 3 Dwr-116, Dwr-116 Firmware, Dwr-116a1 | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Directory traversal vulnerability in the web interface on the D-Link DWR-116 device with firmware before V1.05b09 allows remote attackers to read arbitrary files via a .. (dot dot) in a "GET /uir/" request. | |||||
| CVE-2017-5874 | 2 D-link, Dlink | 2 Dir-600m Firmware, Dir-600m | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact. | |||||
| CVE-2017-5633 | 2 D-link, Dlink | 2 Di-524 Firmware, Di-524 | 2024-11-21 | 8.5 HIGH | 8.0 HIGH |
| Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs. | |||||
| CVE-2017-3193 | 1 Dlink | 2 Dir-850l, Dir-850l Firmware | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service. | |||||
| CVE-2017-3192 | 2 D-link, Dlink | 4 Dir-130 Firmware, Dir-330 Firmware, Dir-130 and 1 more | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device. | |||||
| CVE-2017-3191 | 2 D-link, Dlink | 4 Dir-130 Firmware, Dir-330 Firmware, Dir-130 and 1 more | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials. | |||||