Filtered by vendor Linksys
Subscribe
Total
100 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2013-3064 | 1 Linksys | 2 Ea6500, Ea6500 Firmware | 2024-11-21 | 6.8 MEDIUM | N/A |
| Open redirect vulnerability in ui/dynamic/unsecured.html in Linksys EA6500 with firmware 1.1.28.147876 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the target parameter. | |||||
| CVE-2011-4500 | 2 Cisco, Linksys | 2 Linksys Wrt54gx Router Firmware, Wrt54gx | 2024-11-21 | 7.5 HIGH | N/A |
| The UPnP IGD implementation on the Cisco Linksys WRT54GX with firmware 2.00.05, when UPnP is enabled, configures the SOAP server to listen on the WAN port, which allows remote attackers to administer the firewall via SOAP requests. | |||||
| CVE-2011-4499 | 2 Cisco, Linksys | 4 Linksys Wrt54g Router Firmware, Linksys Wrt54gs Router Firmware, Wrt54g and 1 more | 2024-11-21 | 7.5 HIGH | N/A |
| The UPnP IGD implementation in the Broadcom UPnP stack on the Cisco Linksys WRT54G with firmware before 4.30.5, WRT54GS v1 through v3 with firmware before 4.71.1, and WRT54GS v4 with firmware before 1.06.1 allows remote attackers to establish arbitrary port mappings by sending a UPnP AddPortMapping action in a SOAP request to the WAN interface, related to an "external forwarding" vulnerability. | |||||
| CVE-2010-2261 | 1 Linksys | 1 Wap54gv3 | 2024-11-21 | 10.0 HIGH | N/A |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) data2 and (2) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2010-1573 | 1 Linksys | 2 Wap54g, Wap54g Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2009-5157 | 1 Linksys | 2 Wag54g2, Wag54g2 Firmware | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable. | |||||
| CVE-2009-5140 | 1 Linksys | 2 Spa2102, Spa2102 Firmware | 2024-11-21 | 4.3 MEDIUM | 8.8 HIGH |
| The SIP implementation on the Linksys SPA2102 phone adapter provides hashed credentials in a response to an invalid authentication challenge, which makes it easier for remote attackers to obtain access via a brute-force attack, related to a "SIP Digest Leak" issue. | |||||
| CVE-2009-3341 | 1 Linksys | 1 Wrt54gl | 2024-11-21 | 10.0 HIGH | N/A |
| Buffer overflow on the Linksys WRT54GL wireless router allows remote attackers to execute arbitrary code via unspecified vectors, as demonstrated by a certain module in VulnDisco Pack Professional 8.10 through 8.11. NOTE: as of 20090917, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes. | |||||
| CVE-2008-4594 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2024-11-21 | 10.0 HIGH | N/A |
| Unspecified vulnerability in the SNMPv3 component in Linksys WAP4400N firmware 1.2.14 on the Marvell Semiconductor 88W8361P-BEM1 chipset has unknown impact and attack vectors, probably remote. | |||||
| CVE-2008-4441 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2024-11-21 | 7.1 HIGH | N/A |
| The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not properly parse malformed 802.11 frames, which allows remote attackers to cause a denial of service (reboot or hang-up) via a malformed association request containing the WEP flag, as demonstrated by a request that is too short, a different vulnerability than CVE-2008-1144 and CVE-2008-1197. | |||||
| CVE-2008-2092 | 1 Linksys | 1 Spa-2102 Phone Adapter | 2024-11-21 | 7.8 HIGH | N/A |
| Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). NOTE: the severity of this issue has been disputed since there are limited attack scenarios. | |||||
| CVE-2008-1268 | 1 Linksys | 1 Wrt54g | 2024-11-21 | 10.0 HIGH | N/A |
| The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password. | |||||
| CVE-2008-1265 | 1 Linksys | 1 Wrt54g | 2024-11-21 | 7.8 HIGH | N/A |
| The Linksys WRT54G router allows remote attackers to cause a denial of service (device restart) via a long username and password to the FTP interface. | |||||
| CVE-2008-1264 | 1 Linksys | 1 Wrt54g | 2024-11-21 | 7.5 HIGH | N/A |
| The Linksys WRT54G router has "admin" as its default FTP password, which allows remote attackers to access sensitive files including nvram.cfg, a file that lists all HTML documents, and an ELF executable file. | |||||
| CVE-2008-1263 | 1 Linksys | 1 Wrt54g | 2024-11-21 | 4.0 MEDIUM | N/A |
| The Linksys WRT54G router stores passwords and keys in cleartext in the Config.bin file, which might allow remote authenticated users to obtain sensitive information via an HTTP request for the top-level Config.bin URI. | |||||
| CVE-2008-1247 | 1 Linksys | 1 Wrt54g | 2024-11-21 | 10.0 HIGH | N/A |
| The web interface on the Linksys WRT54g router with firmware 1.00.9 does not require credentials when invoking scripts, which allows remote attackers to perform arbitrary administrative actions via a direct request to (1) Advanced.tri, (2) AdvRoute.tri, (3) Basic.tri, (4) ctlog.tri, (5) ddns.tri, (6) dmz.tri, (7) factdefa.tri, (8) filter.tri, (9) fw.tri, (10) manage.tri, (11) ping.tri, (12) PortRange.tri, (13) ptrigger.tri, (14) qos.tri, (15) rstatus.tri, (16) tracert.tri, (17) vpn.tri, (18) WanMac.tri, (19) WBasic.tri, or (20) WFilter.tri. NOTE: the Security.tri vector is already covered by CVE-2006-5202. | |||||
| CVE-2008-1243 | 1 Linksys | 1 Wrt300n | 2024-11-21 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability on the Linksys WRT300N router with firmware 2.00.20, when Mozilla Firefox or Apple Safari is used, allows remote attackers to inject arbitrary web script or HTML via the dyndns_domain parameter to the default URI. | |||||
| CVE-2008-0228 | 1 Linksys | 1 Wrt54gl | 2024-11-21 | 9.3 HIGH | N/A |
| Cross-site request forgery (CSRF) vulnerability in apply.cgi in the Linksys WRT54GL Wireless-G Broadband Router with firmware 4.30.9 allows remote attackers to perform actions as administrators. | |||||
| CVE-2007-6709 | 1 Linksys | 1 Wag54gs | 2024-11-21 | 7.5 HIGH | N/A |
| The Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access. | |||||
| CVE-2007-6708 | 1 Linksys | 1 Wag54gs | 2024-11-21 | 4.3 MEDIUM | N/A |
| Multiple cross-site request forgery (CSRF) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to perform actions as administrators via an arbitrary valid request to an administrative URI, as demonstrated by (1) a Restore Factory Defaults action using the mtenRestore parameter to setup.cgi and (2) creation of a user account using the sysname parameter to setup.cgi. | |||||