Filtered by vendor Cisco
Subscribe
Total
6186 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0304 | 1 Cisco | 10 Firepower 9000, Firepower 9000 Firmware, Nexus 5000 and 7 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859. | |||||
| CVE-2018-0303 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. | |||||
| CVE-2018-0302 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2024-11-21 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743. | |||||
| CVE-2018-0301 | 1 Cisco | 66 Mds 9000, Nexus 172tq-xl, Nexus 3016 and 63 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412. | |||||
| CVE-2018-0300 | 1 Cisco | 6 Firepower 4110, Firepower 4120, Firepower 4140 and 3 more | 2024-11-21 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901. | |||||
| CVE-2018-0299 | 1 Cisco | 2 Nexus 4001i, Nx-os | 2024-11-21 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442. | |||||
| CVE-2018-0298 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799. | |||||
| CVE-2018-0297 | 1 Cisco | 1 Firepower Threat Defense | 2024-11-21 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability in the detection engine of Cisco Firepower Threat Defense software could allow an unauthenticated, remote attacker to bypass a configured Secure Sockets Layer (SSL) Access Control (AC) policy to block SSL traffic. The vulnerability is due to the incorrect handling of TCP SSL packets received out of order. An attacker could exploit this vulnerability by sending a crafted SSL connection through the affected device. A successful exploit could allow the attacker to bypass a configured SSL AC policy to block SSL traffic. Cisco Bug IDs: CSCvg09316. | |||||
| CVE-2018-0296 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029. | |||||
| CVE-2018-0295 | 1 Cisco | 65 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 62 more | 2024-11-21 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387. | |||||
| CVE-2018-0294 | 1 Cisco | 75 Firepower 4110, Firepower 4120, Firepower 4140 and 72 more | 2024-11-21 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | |||||
| CVE-2018-0293 | 1 Cisco | 65 Mds 9100, Nexus 172tq-xl, Nexus 3016 and 62 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904. | |||||
| CVE-2018-0292 | 1 Cisco | 72 Nexus 172tq-xl, Nexus 2148t, Nexus 2224tp Ge and 69 more | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Internet Group Management Protocol (IGMP) Snooping feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the IGMP Snooping subsystem. An attacker could exploit this vulnerability by sending crafted IGMP packets to an affected system. An exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCuv79620, CSCvg71263. | |||||
| CVE-2018-0291 | 1 Cisco | 71 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 68 more | 2024-11-21 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977. | |||||
| CVE-2018-0290 | 1 Cisco | 1 Socialminer | 2024-11-21 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the TCP stack of Cisco SocialMiner could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the notification system. The vulnerability is due to faulty handling of new TCP connections to the affected application. An attacker could exploit this vulnerability by sending a malicious TCP packet to the vulnerable service. An exploit could allow the attacker to create a DoS condition by interrupting certain phone services. A manual restart of the service may be required to restore full functionalities. Cisco Bug IDs: CSCvh48368. | |||||
| CVE-2018-0289 | 1 Cisco | 1 Identity Services Engine Software | 2024-11-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the logs component of Cisco Identity Services Engine could allow an unauthenticated, remote attacker to conduct cross-site scripting attacks. The vulnerability is due to improper validation of requests stored in logs in the application management interface. An attacker could exploit this vulnerability by sending malicious requests to the targeted system. An exploit could allow the attacker to conduct cross-site scripting attacks when an administrator views the log files. Cisco Bug IDs: CSCvh11308. | |||||
| CVE-2018-0288 | 1 Cisco | 1 Webex Meetings Online | 2024-11-21 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in Cisco WebEx Recording Format (WRF) Player could allow an unauthenticated, remote attacker to access sensitive data about the application. An attacker could exploit this vulnerability to gain information to conduct additional reconnaissance attacks. The vulnerability is due to a design flaw in Cisco WRF Player. An attacker could exploit this vulnerability by utilizing a maliciously crafted file that could bypass checks in the code and enable an attacker to read memory from outside the bounds of the mapped file. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, and Cisco WebEx WRF players. Cisco Bug IDs: CSCvh89107, CSCvh89113, CSCvh89132, CSCvh89142. | |||||
| CVE-2018-0287 | 1 Cisco | 1 Webex Meetings Online | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability in the Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. The vulnerability is due to a design flaw in the affected software. An attacker could exploit this vulnerability by sending a user an email attachment or link to a malicious ARF file and persuading the user to open the file or follow the link. A successful exploit could allow the attacker to execute arbitrary code on the user's system. This vulnerability affects Cisco WebEx Business Suite meeting sites, Cisco WebEx Meetings sites, Cisco WebEx Meetings Server, and Cisco WebEx ARF players. Cisco Bug IDs: CSCvh70213, CSCvh70222, CSCvh70228. | |||||
| CVE-2018-0286 | 1 Cisco | 1 Ios Xr | 2024-11-21 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792. | |||||
| CVE-2018-0285 | 1 Cisco | 1 Prime Service Catalog | 2024-11-21 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in service logging for Cisco Prime Service Catalog could allow an authenticated, remote attacker to deny service to the user interface. The vulnerability is due to exhaustion of disk space. An attacker could exploit this vulnerability by performing certain operations that lead to excessive logging. A successful exploit could allow the attacker to deny service to the user interface. Cisco Bug IDs: CSCvd39568. | |||||