Total
3666 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-12511 | 1 Netgear | 2 Nighthawk X10-r9000, Nighthawk X10-r9000 Firmware | 2024-02-28 | 9.3 HIGH | 9.8 CRITICAL |
| In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point. | |||||
| CVE-2019-10801 | 1 Enpeem Project | 1 Enpeem | 2024-02-28 | 7.5 HIGH | 9.8 CRITICAL |
| enpeem through 2.2.0 allows execution of arbitrary commands. The "options.dir" argument is provided to the "exec" function without any sanitization. | |||||
| CVE-2019-6013 | 1 Dlink | 2 Dba-1510p, Dba-1510p Firmware | 2024-02-28 | 6.8 MEDIUM | 6.6 MEDIUM |
| DBA-1510P firmware 1.70b009 and earlier allows authenticated attackers to execute arbitrary OS commands via Command Line Interface (CLI). | |||||
| CVE-2019-20501 | 1 Dlink | 2 Dwl-2600ap, Dwl-2600ap Firmware | 2024-02-28 | 7.2 HIGH | 7.8 HIGH |
| D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter. | |||||
| CVE-2019-15351 | 1 Tecno-mobile | 1 Tecno\/h622\/tecno-id5b\ | 2024-02-28 | 7.2 HIGH | 7.8 HIGH |
| The Tecno Camon Android device with a build fingerprint of TECNO/H622/TECNO-ID5b:8.1.0/O11019/G-180829V31:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more. | |||||
| CVE-2020-7597 | 1 Codecov | 1 Codecov | 2024-02-28 | 6.5 MEDIUM | 8.8 HIGH |
| codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596. | |||||
| CVE-2012-5878 | 1 Bulbsecurity | 1 Smartphone Pentest Framework | 2024-02-28 | 10.0 HIGH | 9.8 CRITICAL |
| Bulb Security Smartphone Pentest Framework (SPF) 0.1.2 through 0.1.4 allows remote attackers to execute arbitrary commands via shell metacharacters in the hostingPath parameter to (1) SEAttack.pl or (2) CSAttack.pl in frameworkgui/ or the (3) appURLPath parameter to frameworkgui/attachMobileModem.pl. | |||||
| CVE-2019-15588 | 1 Sonatype | 1 Nexus Repository Manager | 2024-02-28 | 9.0 HIGH | 7.2 HIGH |
| There is an OS Command Injection in Nexus Repository Manager <= 2.14.14 (bypass CVE-2019-5475) that could allow an attacker a Remote Code Execution (RCE). All instances using CommandLineExecutor.java with user-supplied data is vulnerable, such as the Yum Configuration Capability. | |||||
| CVE-2020-1980 | 1 Paloaltonetworks | 1 Pan-os | 2024-02-28 | 7.2 HIGH | 7.8 HIGH |
| A shell command injection vulnerability in the PAN-OS CLI allows a local authenticated user to escape the restricted shell and escalate privileges. This issue affects only PAN-OS 8.1 versions earlier than PAN-OS 8.1.13. This issue does not affect PAN-OS 7.1, PAN-OS 9.0, or later PAN-OS versions. This issue is fixed in PAN-OS 8.1.13, and all later versions. | |||||
| CVE-2020-10216 | 2 Dlink, Trendnet | 4 Dir-825, Dir-825 Firmware, Tew-632brp and 1 more | 2024-02-28 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected. | |||||
| CVE-2019-13025 | 1 Compal | 2 Ch7465lg, Ch7465lg Firmware | 2024-02-28 | 7.5 HIGH | 9.8 CRITICAL |
| Compal CH7465LG CH7465LG-NCIP-6.12.18.24-5p8-NOSH devices have Incorrect Access Control because of Improper Input Validation. The attacker can send a maliciously modified POST (HTTP) request containing shell commands, which will be executed on the device, to an backend API endpoint of the cable modem. | |||||
| CVE-2019-20488 | 1 Netgear | 2 Wnr1000, Wnr1000 Firmware | 2024-02-28 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple actions within the web management interface (setup.cgi) are vulnerable to command injection, allowing remote attackers to execute arbitrary commands, as demonstrated by shell metacharacters in the sysDNSHost parameter. | |||||
| CVE-2020-3167 | 1 Cisco | 27 Adaptive Security Appliance Software, Firepower 1010, Firepower 1120 and 24 more | 2024-02-28 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges. | |||||
| CVE-2019-14889 | 6 Canonical, Debian, Fedoraproject and 3 more | 6 Ubuntu Linux, Debian Linux, Fedora and 3 more | 2024-02-28 | 9.3 HIGH | 8.8 HIGH |
| A flaw was found with the libssh API function ssh_scp_new() in versions before 0.9.3 and before 0.8.8. When the libssh SCP client connects to a server, the scp command, which includes a user-provided path, is executed on the server-side. In case the library is used in a way where users can influence the third parameter of the function, it would become possible for an attacker to inject arbitrary commands, leading to a compromise of the remote target. | |||||
| CVE-2019-13653 | 1 Tp-link | 2 M7350, M7350 Firmware | 2024-02-28 | 10.0 HIGH | 9.8 CRITICAL |
| TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow triggerPort OS Command Injection (issue 5 of 5). | |||||
| CVE-2019-20217 | 1 Dlink | 2 Dir-859, Dir-859 Firmware | 2024-02-28 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because SERVER_ID is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters. | |||||
| CVE-2019-16733 | 2 Petwant, Skymee | 4 Pf-103, Pf-103 Firmware, Petalk Ai and 1 more | 2024-02-28 | 10.0 HIGH | 9.8 CRITICAL |
| processCommandSetUid() in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to execute arbitrary system commands as the root user. | |||||
| CVE-2019-5072 | 1 Tendacn | 2 Ac1200 Smart Dual-band Gigabit Wifi, Ac9v1.0 Firmware | 2024-02-28 | 4.6 MEDIUM | 7.8 HIGH |
| An exploitable command injection vulnerability exists in the /goform/WanParameterSetting functionality of Tenda AC9 Router AC1200 Smart Dual-Band Gigabit WiFi Route (AC9V1.0 Firmware V15.03.05.16multiTRU). A specially crafted HTTP POST request can cause a command injection in the DNS2 post parameters, resulting in code execution. An attacker can send HTTP POST request with command to trigger this vulnerability. | |||||
| CVE-2020-8858 | 1 Moxa | 4 Mgate 5105-mb-eip, Mgate 5105-mb-eip-t, Mgate 5105-mb-eip-t Firmware and 1 more | 2024-02-28 | 9.0 HIGH | 8.8 HIGH |
| This vulnerability allows remote attackers to execute arbitrary code on affected installations of Moxa MGate 5105-MB-EIP firmware version 4.1. Authentication is required to exploit this vulnerability. The specific flaw exists within the DestIP parameter within MainPing.asp. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9552. | |||||
| CVE-2020-5524 | 1 Nec | 6 Aterm Wf1200c, Aterm Wf1200c Firmware, Aterm Wg1200cr and 3 more | 2024-02-28 | 8.3 HIGH | 8.8 HIGH |
| Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands with root privileges via UPnP function. | |||||