Total
3029 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-27978 | 2024-11-21 | N/A | 6.5 MEDIUM | ||
| A Null Pointer Dereference vulnerability in WLAvalancheService component of Ivanti Avalanche before 6.4.3 allows an authenticated remote attacker to perform denial of service attacks. | |||||
| CVE-2024-27660 | 2024-11-21 | N/A | 6.5 MEDIUM | ||
| D-Link DIR-823G A1V1.0.2B05 was discovered to contain a Null-pointer dereferences in sub_41C488(). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. | |||||
| CVE-2024-27405 | 2024-11-21 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. | |||||
| CVE-2024-27053 | 2024-11-21 | N/A | 9.1 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RCU usage in connect path With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data | |||||
| CVE-2024-27041 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. | |||||
| CVE-2024-27037 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: clk: zynq: Prevent null pointer dereference caused by kmalloc failure The kmalloc() in zynq_clk_setup() will return null if the physical memory has run out. As a result, if we use snprintf() to write data to the null address, the null pointer dereference bug will happen. This patch uses a stack variable to replace the kmalloc(). | |||||
| CVE-2024-27028 | 2024-11-21 | N/A | 6.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-mt65xx: Fix NULL pointer access in interrupt handler The TX buffer in spi_transfer can be a NULL pointer, so the interrupt handler may end up writing to the invalid memory and cause crashes. Add a check to trans->tx_buf before using it. | |||||
| CVE-2024-26978 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial: max310x: fix NULL pointer dereference in I2C instantiation When trying to instantiate a max14830 device from userspace: echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device we get the following error: Unable to handle kernel NULL pointer dereference at virtual address... ... Call trace: max310x_i2c_probe+0x48/0x170 [max310x] i2c_device_probe+0x150/0x2a0 ... Add check for validity of devtype to prevent the error, and abort probe with a meaningful error message. | |||||
| CVE-2024-26949 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. | |||||
| CVE-2024-26942 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct. | |||||
| CVE-2024-26924 | 2024-11-21 | N/A | 5.9 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: do not free live element Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo: add_elem("00000000") timeout 100 ms ... add_elem("0000000X") timeout 100 ms del_elem("0000000X") <---------------- delete one that was just added ... add_elem("00005000") timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano) | |||||
| CVE-2024-26903 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx. | |||||
| CVE-2024-26902 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISCV: Fix panic on pmu overflow handler (1 << idx) of int is not desired when setting bits in unsigned long overflowed_ctrs, use BIT() instead. This panic happens when running 'perf record -e branches' on sophgo sg2042. [ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 273.320851] Oops [#1] [ 273.323179] Modules linked in: [ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9 [ 273.332521] Hardware name: Sophgo Mango (DT) [ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e [ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0 [ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978 [ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70 [ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000 [ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015 [ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a [ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0 [ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210 [ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098 [ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca [ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8 [ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d [ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee [ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36 [ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e [ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74 [ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92 [ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783 [ 273.477921] ---[ end trace 0000000000000000 ]--- [ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt | |||||
| CVE-2024-26881 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel... | |||||
| CVE-2024-26854 | 2024-11-21 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: ice: fix uninitialized dplls mutex usage The pf->dplls.lock mutex is initialized too late, after its first use. Move it to the top of ice_dpll_init. Note that the "err_exit" error path destroys the mutex. And the mutex is the last thing destroyed in ice_dpll_deinit. This fixes the following warning with CONFIG_DEBUG_MUTEXES: ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) ice 0000:10:00.0: PTP init successful ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c> CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023 Workqueue: events work_for_cpu_fn RIP: 0010:__mutex_lock+0x773/0xd40 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a> RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8 FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x84/0x170 ? __mutex_lock+0x773/0xd40 ? report_bug+0x1c7/0x1d0 ? prb_read_valid+0x1b/0x30 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __mutex_lock+0x773/0xd40 ? rcu_is_watching+0x11/0x50 ? __kmalloc_node_track_caller+0x346/0x490 ? ice_dpll_lock_status_get+0x28/0x50 [ice] ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice] ? ice_dpll_lock_status_get+0x28/0x50 [ice] ice_dpll_lock_status_get+0x28/0x50 [ice] dpll_device_get_one+0x14f/0x2e0 dpll_device_event_send+0x7d/0x150 dpll_device_register+0x124/0x180 ice_dpll_init_dpll+0x7b/0xd0 [ice] ice_dpll_init+0x224/0xa40 [ice] ? _dev_info+0x70/0x90 ice_load+0x468/0x690 [ice] ice_probe+0x75b/0xa10 [ice] ? _raw_spin_unlock_irqrestore+0x4f/0x80 ? process_one_work+0x1a3/0x500 local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x17/0x30 process_one_work+0x20d/0x500 worker_thread+0x1df/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> irq event stamp: 125197 hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0 softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2024-26786 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully. | |||||
| CVE-2024-26747 | 2024-11-21 | N/A | 4.4 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. | |||||
| CVE-2024-26744 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Support specifying the srpt_service_guid parameter Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 | |||||
| CVE-2024-26731 | 2024-11-21 | N/A | 5.3 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready() syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue. This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock. | |||||
| CVE-2024-26661 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. | |||||