Total
709 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-1229 | 1 Cisco | 86 Mds 9148s, Mds 9250i, Mds 9706 and 83 more | 2024-11-21 | 4.3 MEDIUM | 5.8 MEDIUM |
| A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot. | |||||
| CVE-2021-0293 | 1 Juniper | 1 Junos | 2024-11-21 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in Juniper Networks Junos OS caused by Missing Release of Memory after Effective Lifetime leads to a memory leak each time the CLI command 'show system connections extensive' is executed. The amount of memory leaked on each execution depends on the number of TCP connections from and to the system. Repeated execution will cause more memory to leak and eventually daemons that need to allocate additionally memory and ultimately the kernel to crash, which will result in traffic loss. Continued execution of this command will cause a sustained Denial of Service (DoS) condition. An administrator can use the following CLI command to monitor for increase in memory consumption of the netstat process, if it exists: user@junos> show system processes extensive | match "username|netstat" PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 21181 root 100 0 5458M 4913M CPU3 2 0:59 97.27% netstat The following log message might be observed if this issue happens: kernel: %KERN-3: pid 21181 (netstat), uid 0, was killed: out of swap space This issue affects Juniper Networks Junos OS 18.2 versions prior to 18.2R2-S8, 18.2R3-S7. 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2; This issue does not affect Juniper Networks Junos OS versions prior to 18.2R1. | |||||
| CVE-2021-0272 | 1 Juniper | 6 Junos, Qfx10002-32q, Qfx10002-60c and 3 more | 2024-11-21 | 6.1 MEDIUM | 6.5 MEDIUM |
| A kernel memory leak in QFX10002-32Q, QFX10002-60C, QFX10002-72Q, QFX10008, QFX10016 devices Flexible PIC Concentrators (FPCs) on Juniper Networks Junos OS allows an attacker to send genuine packets destined to the device to cause a Denial of Service (DoS) to the device. On QFX10002-32Q, QFX10002-60C, QFX10002-72Q devices the device will crash and restart. On QFX10008, QFX10016 devices, depending on the number of FPCs involved in an attack, one more more FPCs may crash and traffic through the device may be degraded in other ways, until the attack traffic stops. A reboot is required to restore service and clear the kernel memory. Continued receipt and processing of these genuine packets will create a sustained Denial of Service (DoS) condition. On QFX10008, QFX10016 devices, an indicator of compromise may be the existence of DCPFE core files. You can also monitor PFE memory utilization for incremental growth: user@qfx-RE:0% cprod -A fpc0 -c "show heap 0" | grep -i ke 0 3788a1b0 3221225048 2417120656 804104392 24 Kernel user@qfx-RE:0% cprod -A fpc0 -c "show heap 0" | grep -i ke 0 3788a1b0 3221225048 2332332200 888892848 27 Kernel This issue affects: Juniper Networks Junos OS on QFX10002-32Q, QFX10002-60C, QFX10002-72Q, QFX10008, QFX10016: 16.1 versions 16.1R1 and above prior to 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R3-S2; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2. This issue does not affect releases prior to Junos OS 16.1R1. This issue does not affect EX Series devices. This issue does not affect Junos OS Evolved. | |||||
| CVE-2021-0257 | 1 Juniper | 18 Ex9200, Junos, Mx10 and 15 more | 2024-11-21 | 3.3 LOW | 6.5 MEDIUM |
| On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPCs (Modular Port Concentrators) where Integrated Routing and Bridging (IRB) interfaces are configured and mapped to a VPLS instance or a Bridge-Domain, certain Layer 2 network events at Customer Edge (CE) devices may cause memory leaks in the MPC of Provider Edge (PE) devices which can cause an out of memory condition and MPC restart. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines), including MX-MPC1-3D, MX-MPC1E-3D, MX-MPC2-3D, MX-MPC2E-3D, MPC-3D-16XGE, and CHAS-MXxx Series MPCs. No other products or platforms are affected by this issue. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.2 versions prior to 20.2R1-S3, 20.2R2; 20.3 versions prior to 20.3R1-S1,, 20.3R2. This issue does not affect Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R3-S2; 18.1; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R3-S1; 19.1; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2. | |||||
| CVE-2021-0230 | 1 Juniper | 27 Junos, Srx100, Srx110 and 24 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3. | |||||
| CVE-2021-0215 | 1 Juniper | 1 Junos | 2024-11-21 | 2.9 LOW | 6.5 MEDIUM |
| On Juniper Networks Junos EX series, QFX Series, MX Series and SRX branch series devices, a memory leak occurs every time the 802.1X authenticator port interface flaps which can lead to other processes, such as the pfex process, responsible for packet forwarding, to crash and restart. An administrator can use the following CLI command to monitor the status of memory consumption: user@device> show task memory detail Please refer to https://kb.juniper.net/KB31522 for details. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D54; 15.1X49 versions prior to 15.1X49-D240 ; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. This issue does not affect Juniper Networks Junos OS 12.3, 15.1. | |||||
| CVE-2021-0202 | 1 Juniper | 17 Ex9200, Junos, Mx10 and 14 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1. | |||||
| CVE-2020-9697 | 3 Adobe, Apple, Microsoft | 4 Acrobat Dc, Acrobat Reader Dc, Macos and 1 more | 2024-11-21 | 4.3 MEDIUM | 5.5 MEDIUM |
| Adobe Acrobat and Reader versions 2020.009.20074 and earlier, 2020.001.30002, 2017.011.30171 and earlier, and 2015.006.30523 and earlier have a disclosure of sensitive data vulnerability. Successful exploitation could lead to memory leak. | |||||
| CVE-2020-9431 | 4 Debian, Fedoraproject, Opensuse and 1 more | 4 Debian Linux, Fedora, Leap and 1 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14, the LTE RRC dissector could leak memory. This was addressed in epan/dissectors/packet-lte-rrc.c by adjusting certain append operations. | |||||
| CVE-2020-9249 | 1 Huawei | 2 P30, P30 Firmware | 2024-11-21 | 3.3 LOW | 6.5 MEDIUM |
| HUAWEI P30 smartphones with versions earlier than 10.1.0.160(C00E160R2P11) have a denial of service vulnerability. A module does not deal with mal-crafted messages and it leads to memory leak. Attackers can exploit this vulnerability to make the device denial of service.Affected product versions include: HUAWEI P30 versions Versions earlier than 10.1.0.160(C00E160R2P11). | |||||
| CVE-2020-9124 | 1 Huawei | 8 Cloudengine 12800, Cloudengine 12800 Firmware, Cloudengine 5800 and 5 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| There is a memory leak vulnerability in some versions of Huawei CloudEngine product. An unauthenticated, remote attacker may exploit this vulnerability by sending specific message to the affected product. Due to not release the allocated memory properly, successful exploit may cause memory leak. | |||||
| CVE-2020-9104 | 1 Huawei | 2 P30, P30 Firmware | 2024-11-21 | 3.3 LOW | 4.3 MEDIUM |
| HUAWEI P30 smartphones with Versions earlier than 10.1.0.123(C431E22R2P5),Versions earlier than 10.1.0.123(C432E22R2P5),Versions earlier than 10.1.0.126(C10E7R5P1),Versions earlier than 10.1.0.126(C185E4R7P1),Versions earlier than 10.1.0.126(C461E7R3P1),Versions earlier than 10.1.0.126(C605E19R1P3),Versions earlier than 10.1.0.126(C636E7R3P4),Versions earlier than 10.1.0.128(C635E3R2P4),Versions earlier than 10.1.0.160(C00E160R2P11),Versions earlier than 10.1.0.160(C01E160R2P11) have a denial of service vulnerability. In specific scenario, due to the improper resource management and memory leak of some feature, the attacker could exploit this vulnerability to cause the device reset. | |||||
| CVE-2020-8991 | 1 Redhat | 1 Lvm2 | 2024-11-21 | 2.1 LOW | 2.3 LOW |
| vg_lookup in daemons/lvmetad/lvmetad-core.c in LVM2 2.02 mismanages memory, leading to an lvmetad memory leak, as demonstrated by running pvs. NOTE: RedHat disputes CVE-2020-8991 as not being a vulnerability since there’s no apparent route to either privilege escalation or to denial of service through the bug | |||||
| CVE-2020-8916 | 1 Openthread | 1 Wpantund | 2024-11-21 | 2.1 LOW | 5.0 MEDIUM |
| A memory leak in Openthread's wpantund versions up to commit 0e5d1601febb869f583e944785e5685c6c747be7, when used in an environment where wpanctl is directly interfacing with the control driver (eg: debug environments) can allow an attacker to crash the service (DoS). We recommend updating, or to restrict access in your debug environments. | |||||
| CVE-2020-8229 | 1 Nextcloud | 1 Desktop | 2024-11-21 | 4.9 MEDIUM | 5.5 MEDIUM |
| A memory leak in the OCUtil.dll library used by Nextcloud Desktop Client 2.6.4 can lead to a DoS against the host system. | |||||
| CVE-2020-7217 | 1 Opensuse | 1 Wicked | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An ni_dhcp4_fsm_process_dhcp4_packet memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets with a different client-id. | |||||
| CVE-2020-7216 | 1 Opensuse | 2 Leap, Wicked | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An ni_dhcp4_parse_response memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets without a message type option. | |||||
| CVE-2020-6080 | 2 Debian, Videolabs | 2 Debian Linux, Libmicrodns | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through the function rr_read_RR [5] reads the current resource record, except for the RDATA section. This is read by the loop at in rr_read. For each RR type, a different function is called. When the RR type is 0x10, the function rr_read_TXT is called at [6]. | |||||
| CVE-2020-6079 | 2 Debian, Videolabs | 2 Debian Linux, Libmicrodns | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode. | |||||
| CVE-2020-5924 | 1 F5 | 1 Big-ip Access Policy Manager | 2024-11-21 | 5.0 MEDIUM | 5.3 MEDIUM |
| In BIG-IP APM versions 12.1.0-12.1.5.1 and 11.6.1-11.6.5.2, RADIUS authentication leaks memory when the username for authentication is not set. | |||||