Total
218 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-29735 | 2024-11-21 | N/A | 5.3 MEDIUM | ||
| Improper Preservation of Permissions vulnerability in Apache Airflow.This issue affects Apache Airflow from 2.8.2 through 2.8.3. Airflow's local file task handler in Airflow incorrectly set permissions for all parent folders of log folder, in default configuration adding write access to Unix group of the folders. In the case Airflow is run with the root user (not recommended) it added group write permission to all folders up to the root of the filesystem. If your log files are stored in the home directory, these permission changes might impact your ability to run SSH operations after your home directory becomes group-writeable. This issue does not affect users who use or extend Airflow using Official Airflow Docker reference images ( https://hub.docker.com/r/apache/airflow/ ) - those images require to have group write permission set anyway. You are affected only if you install Airflow using local installation / virtualenv or other Docker images, but the issue has no impact if docker containers are used as intended, i.e. where Airflow components do not share containers with other applications and users. Also you should not be affected if your umask is 002 (group write enabled) - this is the default on many linux systems. Recommendation for users using Airflow outside of the containers: * if you are using root to run Airflow, change your Airflow user to use non-root * upgrade Apache Airflow to 2.8.4 or above * If you prefer not to upgrade, you can change the https://airflow.apache.org/docs/apache-airflow/stable/configurations-ref.html#file-task-handler-new-folder-permissions to 0o755 (original value 0o775). * if you already ran Airflow tasks before and your default umask is 022 (group write disabled) you should stop Airflow components, check permissions of AIRFLOW_HOME/logs in all your components and all parent directories of this directory and remove group write access for all the parent directories | |||||
| CVE-2024-29080 | 2024-11-21 | N/A | 6.5 MEDIUM | ||
| Potential vulnerabilities have been identified in the HP Display Control software component within the HP Application Enabling Software Driver which might allow escalation of privilege. | |||||
| CVE-2024-28746 | 2024-11-21 | N/A | N/A | ||
| Apache Airflow, versions 2.8.0 through 2.8.2, has a vulnerability that allows an authenticated user with limited permissions to access resources such as variables, connections, etc from the UI which they do not have permission to access. Users of Apache Airflow are recommended to upgrade to version 2.8.3 or newer to mitigate the risk associated with this vulnerability | |||||
| CVE-2024-28152 | 2024-11-21 | N/A | 6.3 MEDIUM | ||
| In Jenkins Bitbucket Branch Source Plugin 866.vdea_7dcd3008e and earlier, except 848.850.v6a_a_2a_234a_c81, when discovering pull requests from forks, the trust policy "Forks in the same account" allows changes to Jenkinsfiles from users without write access to the project when using Bitbucket Server. | |||||
| CVE-2024-27888 | 2024-11-21 | N/A | 7.1 HIGH | ||
| A permissions issue was addressed by removing vulnerable code and adding additional checks. This issue is fixed in macOS Sonoma 14.4. An app may be able to modify protected parts of the file system. | |||||
| CVE-2024-23560 | 2024-11-21 | N/A | 4.4 MEDIUM | ||
| HCL DevOps Deploy / HCL Launch could be vulnerable to incomplete revocation of permissions when deleting a custom security resource type. | |||||
| CVE-2024-22405 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| XADMaster is an objective-C library for archive and file unarchiving and extraction. When extracting a specially crafted zip archive XADMaster may not apply quarantine attribute correctly. Such behaviour may circumvent Gatekeeper checks on the system. Only macOS installations are affected. This issue was fixed in XADMaster 1.10.8. It is recommended to upgrade to the latest version. There are no known workarounds for this issue. | |||||
| CVE-2024-22404 | 1 Nextcloud | 1 Zipper | 2024-11-21 | N/A | 4.1 MEDIUM |
| Nextcloud files Zip app is a tool to create zip archives from one or multiple files from within Nextcloud. In affected versions users can download "view-only" files by zipping the complete folder. It is recommended that the Files ZIP app is upgraded to 1.2.1, 1.4.1, or 1.5.0. Users unable to upgrade should disable the file zip app. | |||||
| CVE-2024-22402 | 1 Nextcloud | 1 Guests | 2024-11-21 | N/A | 5.4 MEDIUM |
| Nextcloud guests app is a utility to create guest users which can only see files shared with them. In affected versions users were able to load the first page of apps they were actually not allowed to access. Depending on the selection of apps installed this may present a permissions bypass. It is recommended that the Guests app is upgraded to 2.4.1, 2.5.1 or 3.0.1. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-22401 | 1 Nextcloud | 1 Guests | 2024-11-21 | N/A | 4.1 MEDIUM |
| Nextcloud guests app is a utility to create guest users which can only see files shared with them. In affected versions users could change the allowed list of apps, allowing them to use apps that were not intended to be used. It is recommended that the Guests app is upgraded to 2.4.1, 2.5.1 or 3.0.1. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-22177 | 2024-11-21 | N/A | 3.3 LOW | ||
| in OpenHarmony v3.2.4 and prior versions allow a local attacker cause apps crash through get permission. | |||||
| CVE-2024-21816 | 2024-11-21 | N/A | 4.0 MEDIUM | ||
| in OpenHarmony v4.0.0 and prior versions allow a local attacker cause information leak through improper preservation of permissions. | |||||
| CVE-2024-1726 | 2024-11-21 | N/A | 5.3 MEDIUM | ||
| A flaw was discovered in the RESTEasy Reactive implementation in Quarkus. Due to security checks for some JAX-RS endpoints being performed after serialization, more processing resources are consumed while the HTTP request is checked. In certain configurations, if an attacker has knowledge of any POST, PUT, or PATCH request paths, they can potentially identify vulnerable endpoints and trigger excessive resource usage as the endpoints process the requests. This can result in a denial of service. | |||||
| CVE-2024-0674 | 1 Lamassu | 4 Douro, Douro Firmware, Douro Ii and 1 more | 2024-11-21 | N/A | 6.3 MEDIUM |
| Privilege escalation vulnerability in Lamassu Bitcoin ATM Douro machines, in its 7.1 version, which could allow a local user to acquire root permissions by modifying the updatescript.js, inserting special code inside the script and creating the done.txt file. This would cause the watchdog process to run as root and execute the payload stored in the updatescript.js. | |||||
| CVE-2023-6239 | 1 M-files | 1 M-files Server | 2024-11-21 | N/A | 5.4 MEDIUM |
| Under rare conditions, the effective permissions of an object might be incorrectly calculated if the object has a specific configuration of metadata-driven permissions in M-Files Server versions 23.9, 23.10, and 23.11 before 23.11.13168.7, potentially enabling unauthorized access to the object. | |||||
| CVE-2023-6186 | 3 Debian, Fedoraproject, Libreoffice | 3 Debian Linux, Fedora, Libreoffice | 2024-11-21 | N/A | 8.3 HIGH |
| Insufficient macro permission validation of The Document Foundation LibreOffice allows an attacker to execute built-in macros without warning. In affected versions LibreOffice supports hyperlinks with macro or similar built-in command targets that can be executed when activated without warning the user. | |||||
| CVE-2023-4996 | 2 Microsoft, Netskope | 2 Windows, Netskope | 2024-11-21 | N/A | 6.6 MEDIUM |
| Netskope was made aware of a security vulnerability in its NSClient product for version 100 & prior where a malicious non-admin user can disable the Netskope client by using a specially-crafted package. The root cause of the problem was a user control code when called by a Windows ServiceController did not validate the permissions associated with the user before executing the user control code. This user control code had permissions to terminate the NSClient service. | |||||
| CVE-2023-49932 | 2024-11-21 | N/A | 5.4 MEDIUM | ||
| An issue was discovered in Couchbase Server before 7.2.4. An attacker can bypass SQL++ N1QL cURL host restrictions. | |||||
| CVE-2023-47463 | 1 Gl-inet | 2 Gl-ax1800, Gl-ax1800 Firmware | 2024-11-21 | N/A | 9.8 CRITICAL |
| Insecure Permissions vulnerability in GL.iNet AX1800 version 4.0.0 before 4.5.0 allows a remote attacker to execute arbitrary code via a crafted script to the gl_nas_sys authentication function. | |||||
| CVE-2023-45807 | 1 Amazon | 1 Opensearch | 2024-11-21 | N/A | 5.4 MEDIUM |
| OpenSearch is a community-driven, open source fork of Elasticsearch and Kibana following the license change in early 2021. There is an issue with the implementation of tenant permissions in OpenSearch Dashboards where authenticated users with read-only access to a tenant can perform create, edit and delete operations on index metadata of dashboards and visualizations in that tenant, potentially rendering them unavailable. This issue does not affect index data, only metadata. Dashboards correctly enforces read-only permissions when indexing and updating documents. This issue does not provide additional read access to data users don’t already have. This issue can be mitigated by disabling the tenants functionality for the cluster. Versions 1.3.14 and 2.11.0 contain a fix for this issue. | |||||